This article about the new NSW building laws has been written by Matthew Bell, University of Melbourne.
Three years have passed since a cladding-fuelled fire claimed 72 lives in Grenfell Tower, London, on June 14 2017. The construction industry and its regulators around the world are still grappling with how to create effective regulations to ensure dwellings are built to keep their occupants safe.
The New South Wales Parliament passed two important bills last week: the Design and Building Practitioners Bill 2020 and the Residential Apartment Buildings (Compliance and Enforcement Powers) Bill 2020. This put in place two important pieces of the “jigsaw puzzle”, as NSW Better Regulation Minister Kevin Anderson put it.
Read more: NSW building certification bill still lets developers off the hookGET NOTIFIED WHEN WE PUBLISH NEW Q&As, NEWS AND ARTICLES TO THE SITE
The Residential Apartment Buildings Bill in particular could be a game changer and is the focus of this article. The law is expected to take effect on September 1 2020.
New powers to order serious defects be fixed
The centrepiece of the legislation is an ability for the Secretary of the Department of Customer Service to order the correction of “serious defects” in residential apartment buildings. In practice, the NSW building commissioner and his staff will apply these orders, according to the bill’s second reading speech. Developers can be ordered to rectify building work “if the secretary has a reasonable belief that building work was or is being carried out in a manner that could result in a serious defect”.
The “was” is significant here. These powers of intervention can be used up to ten years after an occupation certificate is issued.
And, to make sure defects are fixed before residents take possession of their apartment, the secretary can issue a “prohibition order” to delay an occupation certificate.
The definition of “serious defect” includes:
- failure to comply with performance requirements of the Building Code of Australia
- defects likely to deny habitability or use of the building for its intended purpose
- use of banned building products.
Other states and territories have in place various provisions to order rectification. However, none of these are as extensive as the new regime in NSW.
In particular, the express power to order rectification after apartments are completed addresses the issue that frustrated the Victorian Building Authority’s 2017 attempt to have the builder rectify non-compliant cladding at the Lacrosse Building in Melbourne. So, the rectification powers are likely, along with the statutory duty of care in the Design and Building Practitioners Bill – also a NSW innovation – to attract interest across the country.
How much will the industry push back?
These measures to rectify defects go to the heart of the commercial drivers that underpin our largely privately delivered apartment stock in Australia. Without an occupation certificate, developers can’t settle the sale of the apartments (usually off-plan). Likewise, their building contractors will typically remain “on the hook” for a raft of obligations under their contracts.
By making defects correction a precondition for issuing the occupation certificate, the new law embraces the “prevention is better than cure” mantra that underpins reforms in Australia and beyond.
Read more: Housing with buyer protection and no serious faults – is that too much to ask of builders and regulators?To what extent will the industry support this shift? Time will tell.
What can be said is that the reforms add a high level of intervention in the commercial drivers of apartment construction when the industry is already operating under the shadow of COVID-19 and its gathering recession. So it is something of a “wildcard” in an already fraught commercial landscape.
This means developers who do not have adequate measures in place to pass the costs of rectification and delayed occupation down the contractual chain are likely to resort to the extensive appeal measures in the legislation. Likewise, when contractors, subcontractors, consultants and suppliers do “carry the can” for such liability, they will look hard at the relief provisions in their contracts.
The disputes and delays that inevitably result can leave apartment owners and renters in limbo, despite the intent of the legislation to protect them.
Read more: It’s not just the building cracks or cladding – sometimes uncertainty does even more harmRegulators need adequate resources
Another crucial “time will tell” aspect is whether the regulator will have enough resources to inspect buildings – and issue prohibition and rectification orders when needed – in a timely manner across the industry.
Crucially, signalling only works if the signal is credible. At present, there are no construction-specific quality certifications and warranties, only generic standards such as the international ISO 9001: 2015. And the administrative burden and costs of independent third-party certification make it unviable for many small companies. So instruments like ISO 9001 are likely of very limited value for effective signalling in the apartment sector.
The legislation largely leaves it to the Department of Customer Service to appoint “authorised officers”. The minister has indicated these officers will be the building commissioner and his staff.
The commissioner was reported in February to be recruiting up to 60 construction professionals as “auditors” for a scheme that looks similar to what is now enshrined in legislation. They will need to move rapidly to have it ready for the extensive interventions that the legislation anticipates.
Read more: Lack of information on apartment defects leaves whole market on shaky footingsA game changer?
Ever since the Grenfell tragedy, politicians around the world have at least paid lip service to the aspiration that “occupants of buildings deserve to feel safe and secure within their walls”. In saying this to the NSW parliament last week, Anderson was able credibly to put forward the Residential Apartment Buildings Bill as a vital piece in the regulatory “puzzle” to achieve that goal.
The issues discussed here are likely to be just the tip of the iceberg as the industry absorbs the implications of the new law (and its forthcoming detail by way of regulations). But recent activity by NSW lawmakers suggests there is at last strong impetus to achieve meaningful and comprehensive reform.
Have a question or something to add to the article? Leave a comment below.
Embed
- NSW: Think strata construction is bad? Strata records are worse!
- NSW Building Defects: Flammable Cladding Crisis. An Update
Matthew Bell, University of Melbourne.
This article is republished from The Conversation under a Creative Commons license. Read the original article.
This post appears in Strata News #363.
Visit Strata Building Defects OR Strata Topics by State pages.
Looking for strata information concerning your state? For state-specific strata information, take a look here.
After a free PDF of this article? Log into your existing LookUpStrata Account to download the printable file. Not a member? Simple – join for free on our Registration page.